RBVM Networking

• IP Address: Each VM has it's own assigned address in the 136.206.16.0/24 subnet.
• Subnet Mask: 255.255.255.0
• Default Gateway: 136.206.16.254
• DNS Server: 136.206.16.254

Proxy Access

All outbound http(s) traffic must go through the proxy - proxy.vmsrv.redbrick.dcu.ie (136.206.16.254) port 3128

Ubuntu

To make sure all your networking software uses the above proxy server, you need to add a file to /etc/apt/apt.conf.d/ and put the details into it. Here's how you do it:

 ~> cd /etc/apt/apt.conf.d
 ~> sudo nano proxy

You'll be asked to enter your VM password at this point, before nano starts.

In this new file (proxy), type the following:

 Acquire::http::Proxy "http://USERNAME:PASSWORD@proxy.vmsrv.redbrick.dcu.ie:3128";

Where USERNAME and PASSWORD are your RedBrick username and password (not your VM ones). Hit Ctrl-x, then "y" to save the details.

And that's it. Simples.

Email

Outbound email may be routed through mailhost.vmsrv.redbrick.dcu.ie (136.206.16.254). Inbound email can not be accepted. For more information see the documentation on configuring exim to send mail from your vm

SSH

You can ssh to and from your vm from minerva

RedBrick VM Project